11. Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, ISO A2/A3 (420.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer Informa-
tion on the Main pane to update the printer information.
12. Make sure the C Page Size setting matches the original size as selected in CPaper Size in the Page Attributes
dialog box—in this case, ISO A4.
13. Select the D Enlarged/Reduced Printing check box.
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF6300 Resizing Originals by Entering a Scaling Value (Mac OS X)
3
79
To Next Page
Loading...
Need help?
General