Make sure the printer is ready for Ink Tank replacement
You can replace ink tanks if the Display Screen advises you to check the amount of ink left or replace ink tanks.
If a message requests you to replace an Ink Tank, press the OK button. In this case, you can skip the step Access
the menu for ink tank replacement. Follow the instructions in Remove the ink tanks.
Important
• Do not remove an Ink Tank during initialization immediately after turning on the printer, or during printhead cleaning.
Note
• Ink Tank replacement is possible even during printing, when print jobs are being canceled, or when paper is being ad-
vanced.
Access the menu for Ink Tank replacement
1
On the Tab Selection screen of the Control Panel, press â—€ or
â–¶ to select the Ink tab (
).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Ink Menu is displayed.
3
Press â–² or â–¼ to select Rep. Ink Tank, and then press the OK button.
A message on the Display Screen requests you to open the Ink Tank Cover. Remove the Ink Tank at this
point.
iPF765
Replacing Ink Tanks
Basic Guide
Maintenance and Consumables Ink Tanks
23
To Next Page
Loading...
