Ink now fills the system. It takes about seven minutes to
complete.
Important
• Never remove an Ink Tank while the system is filling with ink.
• After Printhead has been replaced and filled with ink, Head Posi. Adj. ( Auto(Advanced)) is performed if you
have selected Rep.P.head Print > On in the Control Panel menu. (See "Menu Settings.") →User's Guide
In this case, follow the instructions on the Display Screen for Printhead adjustment.
If Rep.P.head Print is Off, perform Head Posi. Adj. ( Auto(Advanced)) yourself. (See "Automatic Adjust-
ment to Straighten Lines and Colors (Head Posi. Adj.).") →P.77
iPF765
Replacing the Printhead
Basic Guide
Maintenance and Consumables Printheads
33
To Next Page
Loading...
