Canon imagePROGRAF TM-200 Setup Guide

4
4
Place the printer on the stand such that the rear bottom corners of
the printer are aligned with the corners of the stand.
Important
• If you are not using a stand, place the printer in the
installation location and proceed to "Turning On the
Printer".
5
Afx the printer to the stand.
Use an allen wrench to secure the printer with 2 M4 hex screws on
each side from the underside of the supporting plate.
• When setting the printer down temporarily make sure to put the printer on
a at, stable surface.
• Supporting only the center of the printer when carrying or setting the
printer down may damage the printer.
Caution

Canon imagePROGRAF TM-200 Specifications

General

Max Print Resolution	2400 x 1200 dpi
Max Media Width	24 inches
Connectivity	USB, Ethernet, Wi-Fi
Printer Type	Large Format Printer
Media Thickness	0.07 - 0.8 mm
Memory	2 GB
Operating System	Windows, Mac OS
Power Supply	AC 100-240 V, 50/60 Hz
Print Technology	Inkjet
Number of Ink Colors	5
Ink Types	Pigment-based
Media Handling	Roll Feed
Nozzle Pitch	1200 dpi
Ink Droplet Size	5 picoliters
Media Width	203.2 - 610 mm
Maximum Roll Outer Diameter	150 mm
Media Core Size	2 inches
Printing Speed (Plain Paper)	24 sec/A1
Interface	USB 2.0, Wi-Fi
Acoustic Noise	44 dB