Name: Canon imagePROGRAF TM-200
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

∙ When using the stand

-> Assemble the stand on which you will install the printer by referring to the

Printer Stand Setup Guide (separate manual).

∙ When not using the stand

-> Proceed to

"Installing the Printer".

Remove the packaging material.

Remove all of the tape and other packaging material.

Remove the tape afxed to the roll holder.

Assembling the Stand

Installing the Printer

Have 3 people lift up the printer. Have 1 person grasp the carrying handles at the bottom of each side, and 1 person grasp the handles in the middle

of the rear side.

• Moving the printer requires at least 3 people, holding it on the left, right,

and rear sides. Be careful to avoid back strain and other injuries due to

the weight of the printer.

∙ TM-305: Approx. 108 lb (49 kg)

∙ TM-300: Approx. 106 lb (48 kg)

∙ TM-205: Approx. 91 lb (41 kg)

∙ TM-200: Approx. 91 lb (41 kg)

• When moving the printer, rmly grasp the carrying handles (A) under

each side and at the rear side. Holding the printer at other positions is

dangerous and cause injury and damage if the printer is dropped.

Caution

Other manuals for Canon imagePROGRAF TM-200

Questions and Answers:

Need help?

Do you have a question about the Canon imagePROGRAF TM-200 and is the answer not in the manual?

General