Canon imageRUNNER 2525i User Manual

Scanning from a Computer (Remote Scan)
4-12
Using the Basic Functions
4
Scanning from a Computer (Remote Scan)
This section describes the basic operation procedure for scanning originals to load
the scanned images to a computer.
IMPORTANT
• If you want to use the machine as a network scanner, it must be connected to a
computer over an IPv4 network.
• The screen shots shown in this section may differ from the ones displayed on your
computer, depending on the application or operating system you are using.
Switch the Machine Online Place Your Originals
Press (SCAN/OPTIONS) to
display the Scan/Options screen ➞
press [Remote Scan] ➞ [Online].
Place your originals in the feeder or on
the platen glass.
• Close the feeder/platen cover after placing
your originals on the platen glass.
• If the machine is in the Sleep mode, press
(Power).
• Enter your ID and password or insert the
control card if the screen prompts you to do so.
(See “How to Log in to the Machine,” on p. 4-2.)
1 2

Canon imageRUNNER 2525i Specifications

General

Print Speed	25 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	50, 000 pages
First Print Time	6.4 seconds
Memory	512 MB
Interface	USB 2.0, Ethernet
Functions	Print, Copy, Scan
Duplex Printing	Yes
Network Connectivity	Ethernet
Warm-up Time	30 seconds
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter, Executive
Power Consumption	1500 W (maximum)
Operating System Compatibility	Windows, Mac OS
Paper Capacity	250 sheets