Canon imageRUNNER 2530i User Manual

Sending a Fax
4-10
Using the Basic Functions
4
Sending a Fax
This section describes the basic operation procedure for sending a fax.
IMPORTANT
• The Fax function is available only when the optional Super G3 Fax Board-AG1 is
attached to the machine.
• Even when the above option is attached, using the Fax function can be restricted by
the settings of Authorized Send. (See Chapter 4, “Customizing Settings,” in the
Remote UI Guide.)
Display the Send Screen Place Your Originals
Press (SEND) to display the top
screen of the Send and Fax functions.
Place your originals in the feeder or on
the platen glass.
• If the machine is in the Sleep mode, press
(Power).
• Enter your ID and password or insert the
control card if the screen prompts you to do so.
(See “How to Log in to the Machine,” on p. 4-2.)
• If the screen shown below appears, enter your
user name and password and specify the login
destination ➞ press [Log In].
• Close the feeder/platen cover after placing
your originals on the platen glass.
1 2

Canon imageRUNNER 2530i Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Power Consumption (Maximum)	1.5 kW
Functions	Print, Copy, Scan, Send
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	30 ppm (A4)
Copy Speed	Up to 30 ppm (A4)
Paper Capacity	Maximum: 2, 300 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet
Warm-up Time	30 seconds or less
Paper Input (Standard)	250 sheets
Paper Input (Maximum)	2, 300 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter, Executive
Paper Weight	64 to 90 gsm
Interface	USB 2.0, Ethernet
Multiple Copies	Up to 999 copies
Zoom	25% to 400%
Scan Speed	25 ipm (black & white)
Scan to	Email, USB