Canon IMAGERUNNER ADVANCE C5035 Frequently Asked Questions

23
Changing the Settings
Q
20
Can I restrict the number of color copies/prints?
A
If Department ID Management is used, you can restrict the color output within
groups.
Setting the Department ID Management and
Registering the Password:
Press (Settings/Registration) → [Management
Settings] → [User Management] → [Department ID
Management] → [On] → [Register PIN] → [Register] →
enter the Department ID and password → press [OK].
●
Setting the Page Limits:
Press (Settings/Registration) → [Management
Settings] → [User Management] → [Department ID
Management] → [On] → [Register PIN] → [Register] →
[Turn Limits On/O and Set Page Limits] → specify the
page limit settings → press [OK].
●
To perform this procedure, you must have administrator privileges. For more information, see e-Manual > Security.
You can also change the default settings for the Copy screen from Color to Black mode. For more information, see p. 17 in
this manual.
•
•

Canon IMAGERUNNER ADVANCE C5035 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	up to 100, 000 pages
Duplex Printing	Yes
First Print Out Time (Black)	5.4 seconds
First Print Out Time (Color)	8.1 seconds
Hard Disk Drive	160 GB
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm (black and color)
Copy Speed	35 cpm (black/color)
Paper Capacity	1, 200 sheets (standard)
Connectivity	Ethernet, USB
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Memory	2 GB RAM
Functions	Print, Copy, Scan