135
Playback/Erasing
Adjusting the Play Time and Repeat Settings
•Play Time
Sets the duration that each image displays. Choose between 3–10
seconds, 15 seconds and 30 seconds. Displaying time can vary
slightly depending on the image.
• Repeat
Sets whether the slide show stops when all the slides have been
displayed or continues until stopped.
1
Select [Set up].
1. Use the or button to select
[Set up].
2. Press the button.
2
Configure the setting.
1. Use the or button to select
[Play Time] or [Repeat].
2. Use the or button to select
an option.
3. Press the button.
To Next Page
Loading...
Need help?
General
