Canon Laser Shot LBP2900 User Manual

Printing on Envelopes
2-34
Loading and Delivering Paper
2
• The following envelopes cannot be used with this printer. Using any of these envelopes
may result in paper jams that are difficult to clear or may cause damage to the printer.
-Envelopes with fasteners or snaps
-Envelopes with address windows
-Envelopes with adhesive on the surface
-Wrinkled or creased envelopes
-Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
• Before loading the envelopes, push down on the stack of envelopes to release any
remaining air, and press down firmly along the folded edges of the envelopes.
• Do not print on the reverse side (glued side) of envelopes.
NOTE
When printing envelopes, the envelopes may become creased.
Loading Envelopes into the Multi-Purpose Tray
Use the following procedure to load envelopes into the multi-purpose tray.
Always load envelopes lengthways into the multi-purpose tray.
IMPORTANT
• You can only load a single envelope in the manual feed tray.
• Do not touch or pull envelopes out of the multi-purpose tray during printing. Doing so may
cause the printer to malfunction.
1 Pull out the rear paper guide.

Canon Laser Shot LBP2900 Specifications

General

Print Technology	Laser
Print Speed	12 ppm (A4)
Paper Handling	150-sheet input tray
Connectivity	USB 2.0
Memory	2 MB
Dimensions	370 x 251 x 217 mm
Weight	5.7 kg
Supported Paper Types	Plain Paper, Heavy Paper, Transparency, Label, Envelope
Operating System Support	Linux
Warm-up Time	0 seconds
First Print Out Time	9.3 seconds
Paper Size	A4, Letter, Legal
Power Consumption	259 W (Printing), 2 W (Standby)
Print Resolution	2400 x 600 dpi