3-5
Installing the CAPT Software
Setting Up the Printing Environment
3
NOTE
•
For details on the procedure for installing the software when installing the optional
network board and connecting the printer to the computer with LAN, see "Network
Guide".
•
For details on the procedure for installing the software when sharing this printer on a
network and printing from a computer on the network, see "Printing from a Network
Computer by Sharing the Printer on a Network," on p. 3-52.
•
A USB cable is only supplied with the printers for China. In other countries and regions,
prepare according to the specifications of your computer. Use a USB cable with the
following symbol.
Installing from CD-ROM Setup
The screen shots used in this section are from Windows XP.
IMPORTANT
If you are using Windows 2000/XP/Server 2003, be sure to log on as a member of
Administrators when starting up.
1
Make sure that the printer and computer are OFF.
2
Connect the B-type (square) end of the USB cable to the USB
connector on the printer.
To Next Page
Loading...
Need help?
General
