Canon LEGRIA HF M306 User Manual

100  Photos
Additional Functions
Taking Photos in y Manual Mode
1 Set the mode switch to y.
2 Turn on the camcorder.
• b By default, photos are
recorded in the built-in memory.
You can select the memory that will
be used to record photos (0 35).
• Please read the IMPORTANT
section before using an Eye-Fi
card.
3Touch [3] to switch to
mode.
4 Press
j halfway.
Once the focus is automatically adjusted, h will turn green and one or
more AF frames will appear.
5 Press
j fully.
The ACCESS indicator will flash as the photo is being recorded.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• When recording photos on an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also Using an Eye-Fi card (0 134).
Operating modes:

Canon LEGRIA HF M306 Specifications

General

Digital zoom	300 x
Optical zoom	15 x
Image stabilizer	Yes
Sensor type	CMOS
Total megapixels	3.3 MP
Optical sensor size	1/4 \
Effective megapixels (movie)	2990000 MP
Display diagonal	2.7 \
Maximum video resolution	1920 x 1080 pixels
Still image resolution(s)	640 x 480, 1600 x 1200, 2304 x 1296
Audio dubbing	No
Camera shutter speed	1/2000 s
Self-timer delay	10 s
Minimum illumination	0.4 lx
USB 2.0 ports quantity	1
Product color	Black, Silver
Battery type	BP-808
Battery life (max)	1.4 h
Bundled software	PIXELA ImageMixer 3 SE
Maximum memory card size	32 GB

Weight and Dimensions

Depth	123 mm
Width	68 mm
Height	60 mm
Weight	320 g