Name: Canon Legria HF20
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Video  45

A beep will sound and the green ON/OFF (CHG) indicator will change

to orange to indicate the camcorder entered standby mode.

2 When you wish to resume recording, open the LCD panel.

The ON/OFF (CHG) indicator turns back green and the camcorder is

ready to record.

IMPORTANT

• Do not disconnect the power source during standby mode (while the

ON/OFF (CHG) indicator is lit in orange).

NOTES

• The camcorder will not enter standby mode if the LCD panel is closed

while the ACCESS indicator is on or flashing or while a menu is being

displayed. The camcorder may also not enter standby mode if the LCD

panel is closed while the memory card slot cover is open or when the

battery charge is too low. Check that the ON/OFF (CHG) indicator

changes to orange.

• The camcorder will shut off if left in standby mode for 10 minutes,

regardless of the [Power Saving Mode] setting ( 139). Press

to turn on the camcorder.

• You can select the length of time until shut-off or turn off the Quick Start

function altogether with the [Quick Start] setting ( 139).

• Changing the position of the camera mode dial while the camcorder is

in standby mode will reactivate the camcorder in the operating mode

selected.

POWER

Questions and Answers:

Need help?

Do you have a question about the Canon Legria HF20 and is the answer not in the manual?

Canon Legria HF20 Specifications

General