Canon LV-7290 Command Specifications

LV-7290 / LV-7295 / LV-7390/ LV-8225 Expand Serial Command Functional Specifications
61
9.9 Lamp Status Read Command
9.9.1 CR_LAMPREPL Command
Command “CR_LAMPREPL”[CR]
Details Get information of Lamp Replacement time
Response
Acceptable “000_%1”[CR]
%1
“1Y” -------------------------- Over lamp replacement time
“1N” -------------------------- Within lamp replacement time
“1” means the number of lamps.
(1 lamp model→ “1”)
“Y”/”N” means if it has reached its replacement time or not.
e.g. “1Y” -----------projector is 1 lamp model and Lamp is over its
replacement time
Unacceptable “Error Code”[CR]
9.9.2 CR_LAMPH Command
Command “CR_LAMPH”[CR]
Details
Get total running time of lamp by hour (h)
*Actual running time, not corresponding value
Response
Acceptable “000_%1”[CR]
%1 “00000”~“99999”
Unacceptable “Error Code”[CR]
9.9.3 CR_LAMPCORRESPH Command
Command “CR_LAMPCORRESPH”[CR]
Details
Get total running time of lamp by hour (h)
* Corresponding value, not actual running time
Response
Acceptable “000_%1”[CR]
%1 “00000”~“99999”
Unacceptable “Error Code”[CR]
9.9.4 CR_LAMPMODE Command
Command “CR_LAMPMODE”[CR]
Details Get setting status of Lamp Mode
Response
Acceptable “000_%1”[CR]
%1
“HIGH” -------------------- Lamp Mode is High
“NORMAL” -------------- Lamp Mode is Normal
“ECO” --------------------- Lamp Mode is Eco
Unacceptable “Error Code”[CR]

Canon LV-7290 Specifications

General

Brand	Canon
Model	LV-7290
Category	Projector
Language	English