22
Chapter 3 Basic Setting and Operation
Initial setting
After installing the projector, perform the following basic initial setting.
Click Initial setting on the main menu to display the initial setting page.
Item Description
Language .............. Switches display language on the setting page. (Japanese, English)
Model name ....... Indicates the model name of the projector.
SERIAL NO. ..........Indicates the serial number of the projector.
Network PIN code ......
Sets the Network PIN code to login the setting page. (+p.23)
PJLink ....................... Switches PJLink password authentication. (ON, OFF)
(+p.23)
Password ............... Password for PJLink function.
(+p.23)
* The serial number in the figure is used for an example.
To Next Page
Loading...
Need help?
General
