What to do if my Canon Printer says 'Ink cartridge not installed'?
If your Canon Printer displays an 'Ink cartridge not installed' message, first, re-set the ink cartridge properly. Then, check the carriage contact pins for any foreign material, damage, or bending. If the issue persists, replace the ink cartridge.
How to fix Canon Printer when it says 'No paper in the front tray'?
If your Canon Printer indicates that there is no paper in the front tray, set the paper in the front tray and then press the OK button. Also, check for any foreign material in the paper path, including the front tray and inside the rear cover. Ensure that the paper guides are set properly.
What to do if my Canon MG2270 says non-genuine ink cartridge are installed?
If your Canon Printer displays a 'Premium Contents print error' message, the cause is non-genuine ink cartridge are installed. To resolve this, install the supported (Canon-genuine) ink cartridges.
What to do if my Canon Printer has packing material not removed?
If your Canon Printer indicates that packing material has not been removed, open the paper output cover, remove the tapes and packing material from the carriage, and then close the paper output cover.
What to do if my Canon MG2270 Printer has a carriage error?
If your Canon Printer displays a carriage error, it means there's foreign material obstructing the carriage movement. Remove any foreign material to resolve the issue.
What to do if my Canon MG2270 Printer has a line feed error?
If your Canon Printer displays a line feed error, it indicates foreign material in the LF drive (gear). Remove any foreign material to fix the problem.
What to do if my Canon Printer has a print head temperature rise error?
If your Canon Printer shows a print head temperature rise error, check the remaining ink amount and replace the ink cartridge if it's low.
How to fix Canon MG2270 Printer when paper output cover is open?
If your Canon Printer indicates that the paper output cover is open, close the paper output cover.
How to fix Canon MG2270 when paper output tray is closed?
If your Canon Printer indicates that the paper output tray is closed, open the paper output tray.
Why my Canon MG2270 Printer cannot perform automatic double-sided printing?
Automatic double-sided printing cannot be performed because the paper length is not supported for double-sided printing. Press the OK button to eject the paper. Note that the data intended for the back side of the paper will be skipped.
Explains operator call errors and solutions indicated by Alarm LED and LCD.
Details service call errors based on LED blinking patterns and troubleshooting steps.
Procedures for accessing and using the printer's service mode.
Settings for destination, ink absorber counter, and grease application.
User-accessible functions like nozzle check, print head cleaning, and alignment.
Key points for carriage rail, main chassis, and component assembly.
Specific locations and amounts for grease application during maintenance.
Overview of ink absorber parts, counters, and replacement methods.
Step-by-step instructions for replacing main ink absorbers (easy/regular).
Criteria and guidelines for proactive ink absorber replacement.
Steps to correct print quality issues like doubling and misalignment.
Explains how ink levels are detected and displayed to the user.
Details the new service test pattern and its advantages.
Guide to cleaning the encoder film for specific error resolution.
Visual diagrams illustrating external parts and their locations.
Comprehensive list of parts with numbers, descriptions, and remarks.
General| Print Technology | Inkjet |
|---|---|
| Scanner Type | Flatbed |
| Connectivity | USB 2.0 |
| Functions | Print, Copy, Scan |
| Paper Sizes | A4, 4" x 6", 5" x 7", Envelopes |
| Ink Cartridge Type | PG-745, CL-746 |
| Operating Systems | Windows XP, Windows Vista, Windows 7, Windows 8, Mac OS X 10.6.8 or later |
To Next Page