Canon MP540 - Warnings

(7/58)
1-3. Warnings
Warning Message on the LCD Solution
Low ink "!" is indicated for an applicable ink
tank icon in the Status Monitor.
Since the ink will be used up soon,
prepare for a new ink tank.
Print head temperature rise If the print head temperature does not
fall, the print head error will occur.
When the print head temperature falls,
the error is automatically cleared. If the
print head error is indicated, repair
servicing is required.
Protection of excess rise of
the print head temperature
If the print head temperature does not
fall, the print head error will occur.
If the print head temperature exceeds the
specified limit, an intermission is inserted
during printing.
Restrictions on paper The current paper cannot be set.
Change the size and type.
Re-select the supported paper type and
size.
USB cable not connected Set the PC to start scan. Connect the USB cable, then turn on the
computer.
Reset the selected photo information?
Yes No
Do you want to clear the image
scanned from the photo?
Yes No
Cancellation of image select
information
Do you want to clear the scanned
image and rescan?
Yes No
- Select Yes, and press the OK button.
=> The image selection is cancelled,
and the LCD returns to the display
before the message was displayed.
- Select No, and press the OK button.
=> The LCD returns to the display
immediately before the message
was displayed.