Canon MP540 - Page 9

(9/58)
No. Name Function Remarks
(1) Test Print Service test print Paper will feed from the rear tray.
Service test print:
- Model name
- ROM version
- Ink absorber counter value (ink amount in the ink
absorber)
- USB serial number
- Destination
- EEPROM information
- Process inspection information
- Barcode (model name + destination)
- Ink system function check result
(2) EEPROM EEPROM information print The dialog box opens to select the paper source.
Select Rear tray or Cassette, and click OK.
EEPROM information print:
- Model name
- ROM version
- Ink absorber counter value (ink amount in the ink
absorber)
- Print information
- Error information, etc.
(3) CD-R CD-R check pattern print Not used.
(4) LF / Eject LF / Eject correction
pattern print
See “LF / Eject correction” below.
(5) Left Margin Left margin pattern print Not used.
(6) Deep Cleaning Print head deep cleaning Cleaning of both Black and Color at the same
time.
(7) Main Main ink absorber counter
resetting
Set a sheet of A4 or Letter sized plain paper. After
the ink absorber counter is reset, the counter value
is printed automatically.
(8) Platen Platen ink absorber
counter resetting
Not used.