EasyManua.ls Logo

Canon MX410 - English; Default Chapter; Table of Contents

Canon MX410
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
ENGLISH
Network Setup Troubleshooting
This manual describes problems that may be encountered when setting up a network and their possible
causes and solutions.
Find a description related to your problem and follow the solution.
For problems not described here or which occur after setup, refer to the on-screen manual: Basic Guide/
Advanced Guide.
Screens are based on Windows 7 Home Premium.
Names of functions, etc. may differ from this manual depending on your access point or application
software.
The following symbols are used in this manual.
Description for Windows users.
Description for Macintosh users.
Instructions as notes for operation or additional explanations.
Other Troubleshooting Tips
Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security
Protocol (encryption standard), and Network Key
The Machine is Not Detected after the Network Environment is Changed
P.8
P.8
Connection Checklist P.11
Reference Information P.8
Restoring the Machine's Default LAN Settings to Perform Setup Again P.10
P.8
Configuring Wireless LAN Settings Manually P.8
P.2
Check Access Point to Be Used Screen is Displayed
P.4
Multiple APs detected is Displayed
Failed to connect is Displayed
Check Settings Screen is Displayed
P.7
P.7
The Machine is Not Displayed (Detected) on the Detected Printers List Screen P.5
P.7
Problems during Software Installation
Problems during Network Setup
The Target Access Point is Not Displayed (Detected) on the Detected Access Points
List Screen
P.2
WPS
P.6Set Up New Printer Screen is Displayed
PIN codes do not match is Displayed P.7
An access point could not be detected. is Displayed P.2
Set Printer IP Address Screen is Displayed
P.3
P.3
WPS Additional Computers SetupWCN

Table of Contents

Related product manuals