Canon mx920 - User Manual

XXXXXXXX © CANON INC. 2013
BAHASA INDONESIA


한국어
繁體中文
關於其他設定的詳細資訊，請參閱線上手冊。
傳真接收設定
完成入門指南操作後請閱讀本手冊。
要使用本機的傳真功能，可以透過簡易設定(Easy setup)輸入傳真設定。
簡易設定(Easy setup)啟動。
根據操作環境遵循螢幕上的說明完成設定。
使用{}[]按鈕選擇該項目，然後按OK按鈕。
按功能表 按鈕，然後按照設定(Setup) > 設備設定(Device settings) > 傳真設定
(FAX settings) > 開始簡易設定(Start Easy setup)或簡易設定(Easy setup) > OK按鈕
或開始設定(Start setup)的順序進行選擇。
使用簡易設定(Easy setup)
有關使用簡易設定(Easy setup)進行傳真設定的補充資訊
使用隨附的電話電纜線連接本機至電話線插座。
連接器在本機的背面標記為
。
該圖示顯示基本的連接方法。關於其他連接方法，請參閱線上手冊。
歐洲使用者：如果自己準備電話電纜線，請務必準備6芯電話電纜線。
•
•
連接至電話線插座
連接電話或答錄機時，請取下蓋，然後使用電話電纜線連接電話或答錄機。
連接器在本機的背面標記為
。
請勿使用電話線端子分線器。
英國使用者：根據需要使用B.T.轉接器進行連接。
•
•
連接至電話
輸入設定時請參閱線上手冊。
輸入使用者資訊設定(User information settings)和日期/時間設
定(Date/time setting)
輸入設定時請參閱線上手冊。
DRPD僅適用於美國和加拿大。
根據國家或地區的不同，網路轉換(Network switch)可能不可用。
•
•
輸入DRPD或網路轉換(Network switch)設定
1
2
For the details of other settings, refer to the Online Manual.
Setup for Fax Reception
Read this manual after nishing the operation of Getting Started.
To use the fax features of the machine, you can enter the fax settings through the Easy
setup.
Easy setup starts up.
Follow the on-screen instruction to complete the settings in accordance with the
operating environment.
Use the {}[] button to select the item, then press the OK button.
Press the MENU
button, then select in the order of Setup > Device settings >
FAX settings > Start Easy setup or Easy setup > OK button or Start setup.
Using Easy setup
Complementary Information about Fax Setting Using
Easy setup
Connect the machine to a telephone jack with the supplied telephone line cable.
The connector is labeled
on the back of the machine.
A basic connection method is shown in this figure. For other connection methods, refer
to the Online Manual.
Users in Europe: If you prepare your own telephone line cable, be sure it is a 6-wire
telephone line cable.
•
•
Connect to a Telephone Jack
When connecting a telephone or an answering machine, remove the Cap, then
connect a telephone or an answering machine with a telephone line cable.
The connector is labeled
on the back of the machine.
Do not use a telephone jack line duplexer.
Users in UK: Use a B.T. adapter for connection as required.
•
•
Connect to a Telephone
Refer to the Online Manual to enter the settings.
Enter the User information settings and Date/time setting
Refer to the Online Manual to enter the settings.
DRPD is available only in US and Canada.
Network switch may not be available depending on the region or country.
•
•
Enter the DRPD or Network switch settings
ENGLISH
1
2
QT5-6257-V02
PRINTED IN XXXXXXXX

Canon mx920 Specifications