To Next PageTo Next PageWhat to do if Canon PIXMA MX870 All in One Printer is not detected after network change?
If your Canon All in One Printer isn't detected after changing your network environment, it might be due to a couple of reasons. First, check if the privacy separator feature is enabled on your access point. If it is, disable it. Also, wait until an IP address is assigned to your computer; restarting your computer might also help.
General| Printer Type | All-in-One |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Inkjet |
| Maximum Print Resolution | 9600 x 2400 dpi |
| Print Speed (Black) | 9.4 ipm |
| Print Speed (Color) | 6.1 ipm |
| Scan Resolution (Optical) | 2400 x 4800 dpi |
| Fax Speed | 33.6 Kbps |
| Automatic Document Feeder | Yes |
| ADF Capacity | 35 sheets |
| Connectivity | USB, Ethernet, Wi-Fi |
| Duplex Printing | Yes |
| Paper Capacity | 150 sheets |
| Scanner Type | Flatbed, ADF |
| Display | 2.5" LCD |
| Paper Sizes | Letter, Legal, A4, A5, B5, Envelopes |
| Copy Speed (Black) | Approx. 7.5 cpm |
| Ink Cartridges | 5 (PGI-520BK, CLI-521BK, CLI-521C, CLI-521M, CLI-521Y) |
Details adjustments, periodic maintenance, and replacement parts for service engineers.
Outlines maintenance tasks that can be performed by the end-user.
Lists specialized tools required for maintenance and repair procedures.
Describes various sensors, their functions, and potential problems.
Shows the location of the serial number on the machine.
Lists operator-initiated errors, their causes, solutions, and faulty parts.
Details service-initiated errors, blinking LED patterns, error codes, and solutions.
Lists specific error codes and solutions related to facsimile transmission.
Provides solutions for common operational or quality issues based on symptoms.
Lists major parts that can be replaced and notes on disassembly/reassembly.
Step-by-step instructions and images for replacing various machine components.
Explains functions and procedures available through the machine's operation panel.
Details procedures for entering and using the service mode with specialized tools.
Describes how to enter and configure PTT parameters via the user mode.
Illustrates specific points and methods for applying grease to machine parts.
Provides critical notes and procedures for common servicing issues like print quality.
Outlines the standard inspection flow to confirm proper machine operation after repair.
