To Next PageTo Next Page
Need help?Do you have a question about the Canon PIXMA MX882 Series and is the answer not in the manual?
General| Print Technology | Inkjet |
|---|---|
| Max Print Resolution | 9600 x 2400 dpi |
| Print Speed (Black) | 12.5 ipm |
| Print Speed (Color) | 9.3 ipm |
| Optical Scan Resolution | 2400 x 4800 dpi |
| Connectivity | USB, Ethernet, Wi-Fi |
| Automatic Document Feeder | Yes |
| Duplex Printing | Yes |
| Functions | Print, Copy, Scan, Fax |
| Paper Sizes | 4x6, 5x7, 8x10, Letter, Legal, U.S. #10 Envelopes |
| ADF Capacity | 35 sheets |
| Fax Modem Speed | 33.6 kbps |
| Fax Resolution | 300 x 300 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scanner Type | Flatbed & ADF |
| Fax Speed | Approx. 3 seconds per page |
| Paper Handling | 150 sheets |
| Ink Cartridges | Cyan, Magenta, Yellow, Black |
| Display | 3.0-inch LCD |
Safety warnings about placement and removal of protective materials.
Open scanning unit, secure support, handle head, and remove protective cap.
Tilt and set the print head, then lower the lock lever to secure it.
Remove orange tape, protective film, and protective cap from ink tanks.
Insert ink tanks into slots and install remaining tanks following color order.
Close the scanning unit and allow the machine to clean the print head.
Load specialty paper in the rear tray and prepare guides.
Perform alignment, remove pattern, and confirm completion.
Load specialty paper in portrait orientation with the printing side facing up.
Insert cassette, adjust guides, and load plain paper with printing side down.
Insert cassette firmly, confirm LCD message, and prepare for copy standby screen.
Choose between TEL priority, FAX only, or DRPD modes for fax reception.
Set the chosen fax receive mode using the machine's operation panel.
Select USB, Wireless LAN, or Wired LAN connection based on intended use.
Understand network concepts and check device compatibility for connection.
Close applications, log on as administrator, and prepare the system.
Start setup from CD-ROM, choose installation type and connection method.
Connect USB cable, turn on machine, and finish installation.
Decide whether to install the optional Extended Survey Program.
Optionally install the XPS Printer Driver for enhanced functionality.
Ensure the computer and access point are connected before wireless setup.
Consult device manuals for settings; consider security risks and network limitations.
Collect Access Point Name (SSID) and Network Key (password) for setup.
Select Wireless LAN setup on the machine and activate it by choosing "Yes".
Choose "Easy setup", enter network key, and confirm connection.
Install the software for network connection after successful wireless setup.
Ensure the computer and router are connected before wired setup.
Consult device manuals for configuration; consider security and network limitations.
Remove cap, connect machine to router using Ethernet cable.
Access LAN settings and select "Wired LAN active" for connection.
Install the software for network connection after wired setup.
Close applications, log on as admin, and prepare system for installation.
Insert CD-ROM and run setup program for Windows or Macintosh.
Choose Easy/Custom Install and select wireless or wired connection.
Detect the printer on the network and complete the installation process.
Register printer and scanner to the computer via Canon IJ Network Tool.
Optionally install the XPS Printer Driver for enhanced functionality.
Install software and drivers on other computers on the same network.
Follow the "Install the Software (Network Connection)" procedure.
Start over from "Wireless Setup" to change from USB to wireless connection.
Access functions and information to utilize the machine fully.
Use Easy-WebPrint EX to easily print web pages from browsers.
Load paper and use Solution Menu EX to print photos from your computer.
Load paper, place document, and initiate a standard copy process.
Load document into ADF and send faxes in black and white.
Select Wireless LAN setup and activate it using the WPS function.
Choose between Push button method or PIN code method for WPS setup.
Select Push button method and press OK on the machine and access point.
Press and hold WPS button on access point, then press OK on machine.
Configure network name (SSID) and copy profile to USB flash drive.
Select WCN setup on machine, connect USB flash drive, and complete setup.
Details on printing resolution, interface, operating environment, power, and copy features.
Information on scanner driver, scanning sizes, resolutions, and network protocols.
Fax specifications, modem speed, transmission speed, and system requirements.
