EasyManuals Logo

Canon PIXMA G3520 User Manual

Canon PIXMA G3520
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #395 background imageLoading...
Page #395 background image
Message (Support Code) Appears
This section describes some of the messages that may appear.
Note
• A support code (error number) is displayed for some errors. For details on errors that have support
code, see List of Support Code for Error.
If a message appears on the printer's LCD, see below.
Message Appears on Printer's LCD
If a message appears on the computer, see below.
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)
Message Appears on Printer's LCD
Check the message and take appropriate action.
• Cannot connect to the server; try again
The printer cannot connect to the server due to a communication error.
Press the printer's OK button to cancel the error and try again after a while.
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
The printer may have been unplugged while it was on.
Check the error message that appears on the computer and click OK.
The printer starts printing.
See
Unplugging the Printer to unplug the printer correctly.
Writing Error/Output Error/Communication Error (Windows)
Check1
If the ON lamp is off, make sure printer is plugged in and turn on.
The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.
Check2
Make sure printer is properly connected to computer.
If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:
• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.
• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
If you use the printer over a LAN, make sure the printer is correctly set up for network use.
395

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon PIXMA G3520 and is the answer not in the manual?

Canon PIXMA G3520 Specifications

General IconGeneral
Print TechnologyInkjet
Print Resolution4800 x 1200 dpi
FunctionsPrint, Copy, Scan
Mono Print Speed9.1 ipm
Colour Print Speed5.0 ipm
Borderless PrintingYes
Two Sided PrintingManual
Scanner TypeFlatbed
Scanner Resolution (Optical)600 x 1200 dpi
Multiple CopyUp to 99 pages
Display Type & Size2-Line LCD
Maximum Paper Input100 sheets (plain paper)
Weight6.4 kg
Dimensions445 x 330 x 167 mm
Photo Print SpeedApprox. 45 seconds (borderless 10 x 15 cm photo)
Scanning Depth (Input / Output)48 bit / 24 bit (RGB each 16 bit / 8 bit)
Copy FunctionsDocument Copy, Borderless Copy
Interface TypeUSB, Wi-Fi
Supported Operating SystemsWindows 10, Windows 8.1, Windows 7 SP1
Mobile Operating Systems SupportedAndroid, iOS
Paper TypesPlain Paper, Photo Paper Plus Glossy II, Photo Paper Pro Luster, Photo Paper Plus Semi-gloss, Glossy Photo Paper 'Everyday Use', Matte Photo Paper
Paper SizesA4, A5, B5, Letter, Legal, Envelopes (DL, COM10), 4x6", 5x7"
Ink TypePigment Black, Dye-based Colour

Related product manuals