To Next PageTo Next Page
Need help?Do you have a question about the Canon Pixma iP4850 and is the answer not in the manual?
General| Color | Yes |
|---|---|
| Number of print cartridges | 5 |
| Envelopes sizes | DL |
| Maximum print size | 210 x 297 mm |
| Paper tray media types | Envelopes, Glossy paper, High resolution paper, Matte paper, Photo paper, Plain paper |
| Non-ISO print media sizes | Legal |
| ISO A-series sizes (A0...A9) | A4, A5 |
| ISO B-series sizes (B0...B9) | B5 |
| Borderless printing media sizes | A4, Letter |
| Maximum ISO A-series paper size | A4 |
| Maximum resolution | 9600 x 2400 DPI |
| Time to first page (color, normal) | 20 s |
| Print speed (black, normal quality, A4/US Letter) | 11 ppm |
| Print speed (color, normal quality, A4/US Letter) | 9.3 ppm |
| Interface | USB 2.0 B |
| Print technology | Inkjet |
| Power supply type | AC |
| Power requirements | AC 100-240V, 50/60Hz |
| Input capacity (tray 2) | 150 sheets |
| Supported media weight(s) | 64 - 105 g/m² |
| Package weight | 5700 g |
| Bundled software | Canon Easy-PhotoPrint EX, Canon Easy-WebPrint EX, Canon Solution Menu EX |
| Minimum RAM | 512 MB |
| Minimum processor | 300MHz |
| Minimum system requirements | Microsoft Internet Explorer 6, Safari 3, CD-ROM |
| Compatible operating systems | Microsoft Windows 7/Windows Vista/Windows XP, Mac OS X v.10.4.11 - 10.6 |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 1.1 W |
| Power consumption (printing) | 17 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Market positioning | Home & office |
Weight and Dimensions| Depth | 297 mm |
|---|---|
| Width | 431 mm |
| Height | 153 mm |
Describes how to set up and use your printer.
Describes troubleshooting tips for problems you may encounter.
Remove all orange tape and protective materials from the inside and outside of the printer.
Insert the power cord into the printer and the wall outlet firmly.
Press the ON button, wait for the POWER lamp to be off.
The Print Head Holder (C) moves to the installation position.
Remove the Print Head from the silver package.
Firmly lift the part (D) of the Print Head Lock Lever until it stops.
Avoid connecting the USB cable until instructed during software installation.
Copy drivers and software to the computer's hard disk, takes about 20 minutes.
Insert the Setup CD-ROM and the program starts automatically in Windows.
Select Easy Install or Custom Install for software installation.
Connect the printer with a USB cable and turn it ON.
Load specialty paper (Matte Photo Paper MP-101) in the Rear Tray (B).
Click Execute to start the print head alignment process.
Details printing resolution, interface, dimensions, weight, and ink.
Lists required operating system, processor, RAM, browser, disk space, and CD-ROM drive.
