To Next PageTo Next PageWhat to do if my Canon PIXMA MP140 shows error E4?
If your Canon All in One Printer displays error E, 4, it means the ink has run out. To resolve this, replace the ink cartridge and close the Scanning Unit (Printer Cover). If printing is in progress and you wish to continue, press the Stop/Reset button for at least 5 seconds with the ink cartridge installed.
What to do if my Canon All in One Printer has error E3, a paper jam?
If your Canon All in One Printer is displaying error E, 3, it indicates a paper jam. To fix this, carefully remove the jammed paper, reload the paper correctly into the machine, and then press the Black or Color button to resume printing.
How to fix error E2 on my Canon PIXMA MP140 All in One Printer?
If your Canon All in One Printer is displaying error E, 2, it means the machine is out of paper or paper does not feed. To solve this, reload paper in the Auto Sheet Feeder and then press the Black or Color button.
What does error E8 mean on my Canon All in One Printer?
If your Canon All in One Printer is displaying error code E, 8, it indicates that the ink absorber is almost full. You can press the Black or Color button to cancel the error and continue printing. However, it is recommended to contact a Canon service representative before the ink absorber becomes completely full.
What to do when my Canon All in One Printer shows error E16?
If your Canon All in One Printer is displaying error E, 1, 6, it indicates that the ink level cannot be detected. If you wish to continue printing without this function, press the Stop/Reset button for at least 5 seconds.
Why does my Canon PIXMA MP140 All in One Printer show error E19?
If your Canon All in One Printer is displaying error E, 1, 9, it means that the size of the document cannot be correctly detected, or the document is too small when the Fit-to-Page copying is selected. Make sure the document meets the requirements and is correctly loaded on the Platen Glass. Then, reload the document and press the Black or Color button.
How do I fix error E7 on my Canon PIXMA MP140 All in One Printer?
If your Canon All in One Printer is displaying error E, 7, it indicates that the FINE Cartridge is not installed in the correct position. Confirm that the FINE Cartridges are installed in the appropriate positions.
What does it mean if my Canon PIXMA MP140 All in One Printer displays errors E2x E3x E4x?
If your Canon All in One Printer displays errors such as E, 2, x E, 3, x E, 4, x, it indicates that an error requiring servicing might have occurred. Turn off the machine and unplug the power cord from the power supply.
Why can't I install the MP drivers for my Canon All in One Printer?
If you're experiencing issues installing the MP Drivers for your Canon All in One Printer, consider these points: If you can't proceed beyond the Printer Connection screen, click Cancel. If the installation doesn't start automatically when the Setup CD-ROM is inserted, click Start > My Computer > double-click the CD-ROM icon. Ensure you're following the procedure described in your setup sheet. Also, verify the Setup CD-ROM isn't defective by checking if the CD-ROM icon is visible under Start > My Computer.
What does error 300 mean on a Canon PIXMA MP140 All in One Printer?
If your Canon All in One Printer is displaying Error No.: 300, ensure that the machine is turned on and correctly connected to the computer.
General| Print Technology | Inkjet |
|---|---|
| Max Print Resolution | 4800 x 1200 dpi |
| Scanner Type | Flatbed |
| Scanner Resolution | 600 x 1200 dpi |
| Connectivity | USB 2.0 |
| Functions | Print, Copy, Scan |
| Copy Resolution | 600 x 600 dpi |
| Paper Capacity | 100 sheets |
| Ink Cartridge Compatibility | PG-40, CL-41 |
| Supported Operating Systems | Windows, Mac |
| Paper Sizes Supported | Letter, Legal, Envelopes |
| Print Speed (Black) | 22 ppm |
| Print Speed (Color) | 17 ppm |
