Canon PIXMA MP140 Series

Other manuals for Canon PIXMA MP140 Series

Setup Instructions2 pages

Manual2 pages

Questions and Answers

S
Seth MitchellSep 3, 2025
Why can't I install the MP drivers for my Canon All in One Printer?
- K
  Kayla FloresSep 3, 2025
  If you're experiencing issues installing the MP Drivers for your Canon All in One Printer, consider these points: If you can't proceed beyond the Printer Connection screen, click Cancel. If the installation doesn't start automatically when the Setup CD-ROM is inserted, click Start > My Computer > double-click the CD-ROM icon. Ensure you're following the procedure described in your setup sheet. Also, verify the Setup CD-ROM isn't defective by checking if the CD-ROM icon is visible under Start > My Computer.
K
Kimberly MooreSep 18, 2025
Why is my Canon All in One Printer not connecting to my computer at full speed?
- J
  john87Sep 18, 2025
  To ensure your Canon All in One Printer connects to your computer properly, especially regarding Printing Speed and USB 2.0 Hi-Speed Connection, you must verify that your system environment supports USB 2.0 Hi-Speed connection. If your system is not fully compatible, the machine will operate at a lower speed under USB 1.1.
L
Lorraine BarronSep 16, 2025
How to improve print quality on my Canon PIXMA MP140?
- C
  Caitlin HoffmanSep 16, 2025
  If the print results from your Canon All in One Printer are not satisfactory, ensure that the Page Size/Paper Size setting in the printer driver matches the actual size of the paper loaded in the machine. When printing photographs or other graphics, enabling color correction in the printer driver may improve color.
D
Daniel MedinaSep 14, 2025
Why is my Canon PIXMA MP140 not feeding paper correctly?
- L
  Laurie CampbellSep 14, 2025
  If the paper does not feed properly into your Canon All in One Printer, check if you are printing on an inappropriate type of paper that is too thick or curled. You may need to clean the Paper Feed Rollers of the Auto Sheet Feeder. Also, ensure that the paper is loaded correctly.
D
Donna BaileySep 12, 2025
What causes a communication error with my Canon PIXMA MP140?
- T
  Tanya GarciaSep 12, 2025
  If you are experiencing Writing Error/Output Error/Communication Error with your Canon All in One Printer, make sure that the POWER lamp is lit. Also, check the printer port settings to ensure they match the computer’s interface connecting the machine.
D
david95Sep 12, 2025
Why are the LEDs not visible on my Canon PIXMA MP140?
- M
  Michael RomeroSep 12, 2025
  If your Canon All in One Printer is displaying LEDs Cannot Be Seen At All, it could be due to two reasons: the machine is not turned on or the LED may be in the Power Saver mode. Make sure you have pressed the ON/OFF button. If it's in Power Saver mode, press any button on the Operation Panel except for the ON/OFF button to restore the display.
Z
Zachary GomezSep 9, 2025
How to fix Canon All in One Printer FINE Cartridge error?
- K
  Krystal SmithSep 9, 2025
  If your Canon All in One Printer displays error E, 5, E, 1, 4 or E, 1, 5, it means the FINE Cartridge cannot be recognized. To resolve this, install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory, carry out the Print Head Alignment.
A
Amanda NicholsSep 7, 2025
What to do if my Canon PIXMA MP140 All in One Printer is jamming paper?
- W
  William HuertaSep 7, 2025
  If paper jams are occurring in your Canon All in One Printer, specifically in the Paper Output Tray and the Auto Sheet Feeder, remove the paper following the appropriate procedure.
X
xstephensSep 5, 2025
What does error 300 mean on a Canon PIXMA MP140 All in One Printer?
- A
  Amber GrahamSep 5, 2025
  If your Canon All in One Printer is displaying Error No.: 300, ensure that the machine is turned on and correctly connected to the computer.
R
Robert SchwartzAug 20, 2025
What to do if my Canon PIXMA MP140 shows error E4?
- P
  Patricia NicholsAug 21, 2025
  If your Canon All in One Printer displays error E, 4, it means the ink has run out. To resolve this, replace the ink cartridge and close the Scanning Unit (Printer Cover). If printing is in progress and you wish to continue, press the Stop/Reset button for at least 5 seconds with the ink cartridge installed.

Summary

Getting Help from Canon

Help Us Help You Better

Before Using the Machine

Operation Panel Overview

Turning the Machine On and Off

Handling Original Documents

Loading Printing Paper

Copying

Making Copies

Printing from Your Computer

Printing with Windows

Printing with Macintosh

Routine Maintenance

When Printing Becomes Faint or Colors Are Incorrect

Troubleshooting faint prints or incorrect colors, including nozzle check.

Print Head Cleaning Procedures

Steps for performing standard and deep print head cleaning.

Aligning the Print Head

Procedure to adjust print head alignment for better print quality.

Replacing a FINE Cartridge

Detailed steps for checking ink status and replacing ink cartridges.

Cleaning Your Machine

Troubleshooting

Error Code Display on LED

Explanation of error codes displayed on the LED and their solutions.

Printing Does Not Start

Paper Jams

Procedures for clearing paper jams from the machine.

Error Message Appears on the Screen

Safety Precautions

Power Supply Safety

Warnings and precautions related to the printer's power supply.

Choosing a Location for the Printer

Guidelines for selecting a safe and suitable installation location.

Users in the U.S.A.

Limited Warranty Information (USA Only)

Details of the limited warranty provided by Canon U.S.A.

Canon PIXMA MP140 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Scanner Type	Flatbed
Scanner Resolution	600 x 1200 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Copy Resolution	600 x 600 dpi
Paper Capacity	100 sheets
Ink Cartridge Compatibility	PG-40, CL-41
Supported Operating Systems	Windows, Mac
Paper Sizes Supported	Letter, Legal, Envelopes
Print Speed (Black)	22 ppm
Print Speed (Color)	17 ppm