Make sure that the Print Head Holder
(D) moves
to
the installation position.
Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (8)
until it stops.
Close the Document
Cover
(C) and lift it with
the
Scanning Unit (Cover).
o
~--------
Handle the Print Head carefully.
Do
not
drop or apply excessive pressure
to
it.
~-----------------------
The Print Head Holder makes a noise as it moves. This
is
normal operation.
• If the Print Head Holder does not move, make sure that the machine
is
turned
on.
, Hardware Setup 5
To Next Page
Loading...
