Canon PowerShot A1200 User Manual

Using the Self-Timer
59
Shoot.
z Press the shutter button halfway to focus
on the subject, then press it fully.
X When the self-timer starts, the lamp blinks
and the self-timer sound plays.
X Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
z To cancel shooting with the self-timer after
the countdown has started, press the p
button.
z To restore the original setting, choose
in Step 2.
Using the Self-Timer to Prevent Camera Shake
The camera will shoot approximately 2 seconds after the shutter button is
pressed, preventing any camera shake that occurs when pressing the shutter
button.
Choose Î.
z Follow Step 2 on p. 58 to choose Î.
X Once set, Î will appear on the screen.
z Follow Step 3 above to shoot.
You can change the delay and number of shots (p. 60).
COPY

Canon PowerShot A1200 Specifications

General

Sensor	1/2.3-inch CCD
Optical Zoom	4x
Digital Zoom	4x
Image Processor	DIGIC 4
LCD Resolution	230, 000 dots
ISO Range	80 - 1600
Shutter Speed	15-1/2000 sec
Aperture Range	f/2.8-f/5.9
Battery	2x AA batteries
Lens	5.0-20.0mm f/2.8-5.9
Display	2.7-inch LCD
Viewfinder	Optical
Video Recording	720p HD
Focus Range	3 cm (1.2 in.) - infinity (W), 50 cm (1.6 ft.) - infinity (T)
Storage	SD/SDHC/SDXC
Weight	185g (including batteries)