48
Setting the Parameters (EOS D30 Only)
Up to three sets of parameters for loading images can be set in the TWAIN Driver using
the Parameter Settings dialog in addition to the parameters already set on the camera.
Please see the Camera User Guide to learn how to select the parameters for the camera
that are set with the computer.
1. Click the [Camera Settings] button in the TWAIN Driver window.
The Camera Settings dialog will display.
2. Click the [Parameters] button.
The Parameter Settings dialog will display.
3. Click [Add Set].
4. Set each parameter.
5. Click [Apply to Camera].
The settings will be applied to the camera.
Parameter Settings Dialog
Sets the various
parameters.
Loads the contents of a
parameter set saved to the
computer’s hard disk.
Click here first to add a new
parameter set to the camera.
Saves the parameter
set to the computer.
To load the saved
parameter set, click
[Load Settings].
Applies the current
parameter set to
the camera.
To Next Page
Loading...
Need help?
General
