Editing Still Images
126
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
Choose [Red-Eye Correction].
z Press the n button, and then choose
[Red-Eye Correction] on the 1 tab (p. 51).
Choose an image.
z Press the qr buttons to choose an image.
Correct the image.
z Press the m button.
X Red-eye detected by the camera is now
corrected, and frames are displayed around
corrected image areas.
z Enlarge or reduce images as needed. Follow
the steps in “Magnifying Images” (p. 119).
Save as a new image and review.
z Press the opqr buttons to choose [New
File], and then press the m button.
X The image is now saved as a new file.
z Follow step 5 on p. 124.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Correcting Red-Eye
To Next Page
Loading...
