Using Optional Accessories
144
Turn the camera on.
z Press the 1 button to turn the camera on.
X Images from the camera are now displayed
on the TV. (Nothing is displayed on the
camera screen.)
z When finished, turn off the camera and TV
before disconnecting the cable.
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
Make sure the camera is off.
Open the cover.
z Follow step 1 on p. 17 to open the memory
card/battery cover, and then open the coupler
cable port cover as shown.
• Correct display is not possible unless the camera video output format
(NTSC or PAL) matches the TV format. To change the video output
format, press the n button and choose [Video System] on the
3 tab.
Powering the Camera with Household Power
A4000 IS A3400 IS A2400 IS A2300
To Next Page
Loading...
