129
Shooting/Playback Using a TV
I- l l l' llr l
You can use the supplied AV cable to shoot or playback images using
a TV.
Turn off the camera and the TV.
Connect the AV cable to the
camera's A/V OUT terminal.
• Open the terminal cover and plug
the AV cable in all the way.
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
VIDEO
Yellow
AUDIO
Black
Turn on the TV and switch it to video mode.
Turn on the camera.
O
O
&
m
-'4
• The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 50). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
• If the video system is set incorrectly, the camera output may
not display properly.