107
Shooting – Selecting Particular Effects
Switching between Flash Adjustment
Settings
The built-in flash and the externally mounted flash* fire with
automatic flash adjustments (except in the M mode), but it is
possible to set them so that they fire without any adjustments.
* Speedlite 220EX/380EX/420EX/550EX, Macro Ring Lite MR-14EX, Macro
Twin Lite MT-24EX
Compensating the Flash Adjustment ( (Flash))
The flash adjustment can be changed when [Flash Adjust] is set to
[Auto]. The settings can be adjusted in 1/3-stop increments in the
range of –2EV to +2EV. By combining this function with the
camera’s exposure compensation function, you can adjust the
exposure of the background as well as the subject.
Mode Dial
1
Select [Flash Adjust] from the [ (Rec.)] menu.
z See Selecting Menus and Settings (p. 44).
2
Select [Auto] or [Manual] and press the MENU
button.
Mode Dial
1
Press the FUNC. button, then select using the S
SS
S
or T
TT
T arrow on the omni selector.
2
Adjust the compensation using
the main dial or the W
WW
W or X
XX
X arrow
on the omni selector.
z You can shoot the image right after
selecting settings by pressing the shutter
button. The menu displays again after the
shot, allowing you to change the settings
easily.
Downloaded From camera-usermanual.com Canon Manuals
To Next Page
Loading...
Need help?
General
