20
1.
Turn the mode lever to while
pressing the release button (
a
).
The last recorded image will display. If
you have played back images between
shooting sessions however, the last
image viewed will display (Resume
Playback) instead of the last recorded
image. If the memory card has been
switched, or the images on the memory card have been edited with a
computer, the newest image on the memory card appears.
2.
Use the
W
or
X
button to display the image you wish to view (
b
).
Use the W button to move to the previous image and the X button
to move to the next image.
Holding the button down advances the images more rapidly, but
shows them less clearly.
1.
In playback mode, use the
W or X button to select an
image to erase (a) and
press the button (b).
2.
Confirm that [Erase] is
selected (c) and press the
SET button (d).
To exit instead of erasing, select
[Cancel].
Playback
Î
See the Advanced Guide for the various playback methods available.
Erasing
Please note that erased images cannot be recovered.
Exercise adequate caution before erasing an image.
Î
See the Advanced Guide: Erasing Images (p. 132).
To Next Page
Loading...
Need help?
General
