Since the camera can determine the subject and shooting conditions, you
can let it automatically select the best settings for the scene and just shoot.
The camera can also detect and focus
on
faces, setting the color and
brightness to optimal levels.
Turn
on
the
camera.
Press the power button.
The start-up sound will play, and the
startup screen will appear.
Pressing the power button again will turn
the camera off.
Select
the
.->
mode.
Set the mode switch to
tmID.
When you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
The camera focuses on the subject it
judges to be the main subject, and
displays the icon for the determined scene
in
the upper left
of
the screen.
When faces are detected, a white frame
appears on the face
of
the main subject,
while gray frames appear on other
detected faces.
Even
if
the detected faces move, the
camera will follow the faces within a
certain range.
Compose
the
shot.
Moving the zoom lever toward
[tJ
will
zoom
in
on your subject, making it appear
larger. Moving the lever toward
[ID]
will
zoom out from your subject, making it
appear smaller.
18
To Next Page
Loading...
