Using the supplied AV cable (p. 2), you can connect the camera to a TV to
view images you have shot.
iii
Ye,,ow @j
:J Turn off the camera and TV.
_) Connect the camera to the TV.
......... Open the camera's terminal cover and
fully insert the cable plug into the
camera's terminal.
Insert the cable plug fully into the video
input terminals as shown in the illustration.
Turn on the TV and switch it to the
input to which the cable is
connected.
;_l Turn on the camera.
Press the [] button to turn on the camera.
The image will appear on the TV (nothing
will appear on the screen of the camera).
After you finish, turn off the camera and
TV, and unplug the cable.
images will not display correctly if the camera's video output setting (NTSC/PAL)
does not match the TV system. Press the MENU button, choose the ?T tab and
[Video System] to switch to the correct video system.
115
To Next Page
Loading...
