Changing Camera Settings
You can change the start-up image that appears on the screen when you
turn on the camera.
Choose [Start-up Image], then press the
@ button.
Press the 4 _, buttons to choose an
option.
_xx No start-up image.
i #resetima0esl
(cannot be modified)
Preset images.
2 You can set recorded images, and use the
included software to change the images.
When you press the [] button and set the camera to Playback mode, you
can register sounds and images.
Choose [Start-up Image], then press the
@ button.
Press the ,__ buttons to choose [2], then
press the @ button.
Press the 4), buttons to choose an
image, then press the @ button.
Press the 4)' buttons to choose [OK],
then press the @ button to complete
registration.
143
To Next Page
Loading...
