Changing Shooting Function Settings
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for postcard size prints,
Choose [Disp. Overlay], then press the
{_. buttons to choose an option.
Grid Lines A grid overlays the display.
Gray bars will appear on the top
3:2 Guide and bottom of the display. This
area will not print when printing
on paper with a 3:2 aspect ratio.
iota Both "nes;andihe guide
will display.
Choose [IS Mode], then press the _ _,
buttons to choose an option.
Image stabilization is always on.
You can confirm the result
Continuous directly on the display, which
makes it easier to check the
composition or focus.
Image stabilization is only active
Shoot Only at the moment of shooting.
Image stabilization only counters
up and down motion. This option
Panning is recommended for shooting
objects moving horizontally.
150
To Next Page
Loading...
