If you use AC Adapter Kit ACK-DCe0 (sold separately), you can use the
camera without worrying about how much charge is left in the battery.
Turn off the camera.
........................................................................2
In e thecoupler.
........ Open the cover (p. 16) and insert the
coupler as shown until it locks into place
with a click.
,, Close the cover (p. 17).
Terminals
3 Plug the cord into the coupler.
Open the coverand fully insertthe plug
into the coupler.
_{. Connect the power cord.
Connect the power cord to the compact
power adapter, then plug the other end
into a power outlet.
You can turn the camera on to use it.
After you finish, turn off the camera and
unplug the power cord from the power
outlet.
154
To Next Page
Loading...
