Canon Pro9500 Mark II Series User Manual

3.
Click the Maintenance tab and then Custom Settings.
4.
Drag the Ink Drying Wait Time slide bar to set the wait time, and then click Send.
5.
Confirm the message and click OK.
1.
Make sure that the printer is turned on.
2.
Open the Canon IJ Printer Utility.
Opening the Canon IJ Printer Utility (Macintosh)
3.
Select Custom Settings in the pop-up menu.
4.
Drag the Ink Drying Wait Time slide bar to set the wait time, and then click Send.
5.
Confirm the message and click OK.
Check 11: Is the paper scratched by other loaded paper?
Depending on the media type, the paper may be scratched by other loaded paper when feeding from
the Rear Tray. In this case, load one sheet at a time.
Page top
Page 408 of 541 pagesPaper Is Smudged/Printed Surface Is Scratched

Canon Pro9500 Mark II Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Number of Ink Cartridges	10
Borderless Printing	Yes
Connectivity	USB 2.0
Ink Type	Dye-based
Ink Palette	Cyan, Magenta, Yellow, Photo Cyan, Photo Magenta, Red, Green, Black, Matte Black
Media Sizes Supported	4x6, 5x7, 8x10, Letter, Legal, 13x19
Paper Handling	Auto Sheet Feeder
Operating System Compatibility	Windows, Mac
Weight	32.0 lbs (14.5 kg)