Autoflash using groups of receivers ( )
E-TTL II / E-TTL
autoflash photography is possible with two or three receiver groups,
and the flash ratio (proportion of flash output) can be adjusted as needed. In addition,
you can set and shoot in a different flash mode for each firing group, with up to five
groups.
(1) 2 groups (A, B)
(2) 3 groups (A, B, C)
Caution
Take a few test shots in advance.
The transmission distance may be shorter depending on conditions such as the
positioning of the flash units, the surrounding environment, and the weather.
Note
Set up receivers using the mini stand included with them.
20
To Next Page
Loading...
