Need help?Do you have a question about the Canon Speedlite ST-E10 and is the answer not in the manual?
General| Transmission Method | Radio transmission |
|---|---|
| Flash Ratio Control | Yes |
| FE lock | Yes |
| Modeling Flash | Yes |
| Guide Number | N/A (Transmitter only) |
| Flash Coverage | N/A (Transmitter only) |
| Recycling Time | N/A (Transmitter only) |
| Type | Speedlite Transmitter |
| Compatibility | EOS cameras compatible with external flash |
| Transmission Range | Approximately 30 meters |
| Groups | 5 |
| Custom Functions | Yes |
| Dust and Water Resistance | Yes |
| Wireless Control | Yes |
| Compatible Cameras | EOS cameras compatible with external flash |
| Channels | Auto / 1-15 |
| Wireless Channels | Auto / 1-15 |
Explains the meaning of icons used in the manual for related topics and warnings.
Outlines prerequisites and assumptions for using the manual and product.
Instructions on how to mount and remove the ST-E10 transmitter from the camera.
Steps to power on the Speedlite Transmitter ST-E10.
Guide on how to access the transmitter settings via the camera's menu system.
Overview of shooting with wireless flash using radio transmission and system requirements.
Information on optimal placement and effective range for wireless flash shooting.
Configuration of sender and receiver units for wireless shooting.
Configuring transmission channels and radio IDs to avoid interference.
Explains the meaning of the LINK lamp for connection status.
Guide to basic fully automatic wireless shooting using the ST-E10 as a sender.
Step-by-step guide for automatic wireless flash with a single receiver.
Instructions for using multiple receivers for automatic wireless flash.
Advanced features for fully automatic wireless flash photography.
Adjusting flash output to compensate for exposure levels.
Capturing multiple shots with automatically varied flash output.
Enabling flash photography at all shutter speeds.
Creating natural motion trails by firing the flash before the shutter closes.
Locking flash exposure for a specific area of the subject.
Balancing lighting with multiple flash groups using ETTL and flash ratios.
Adjusting lighting balance with two groups of receivers using flash ratios.
Setting up and using three groups of receivers for advanced lighting control.
Managing and configuring multiple flash groups for advanced lighting.
Controlling manual flash output across multiple groups for wireless photography.
Capturing continuous movement with multiple rapid flash bursts.
Determining the correct shutter speed for continuous stroboscopic firing.
Setting different flash modes for each firing group.
Restoring default settings for wireless shooting.
Using receivers to test firing of other flash units.
Using flash units as receivers to enable remote control shooting.
How to set transmitter functions using the camera's menu interface.
Accessing and configuring various transmitter functions through the camera menu.
Setting and customizing transmitter functions using Custom Functions (C.Fn).
Customizing transmitter functions using the Custom Functions (C.Fn) feature.
Details of available Custom Functions for the transmitter.
Resets all Custom Function settings to their default values.
Details of available Custom Functions for the transmitter.
Description of the ST-E10 system and its components.
Solutions for common problems encountered with the transmitter.
Technical details and performance characteristics of the ST-E10.
To Next Page