Reset settings
This item is displayed when you select Printer settings from (Setup) on the HOME screen.
You can set the settings back to the default.
Important
• The administrator password is required to change the settings if it is enabled to change the settings on•
the operation panel using the administrator password.
• Web service setup only•
Sets the Web service settings back to the default.
• LAN settings only•
Sets the LAN settings back to the default.
• Settings only•
Returns the settings such as the paper size, media type, or other setting items back to the default. The
LAN settings is not returned back to the default.
• Reset paper settings for all paper•
Selecting Yes initializes each setting specified in Advanced paper settings.
Entering the administrator password is required if it is enabled.
Important
• When you set the paper settings back to the factory default, added or updated paper information•
using Media Configuration Tool is erased.
• Reset all•
Sets all settings you made to the printer back to the default. The administrator password specified by
Remote UI or Wi-Fi Connection Assistant reverts to the default setting.
After resetting, perform setup again as necessary.
Note
• You cannot set the following setting items back to the default:•
The language displayed on the touch screen
The current position of the print head
The cumulative usage count of this product registered in Usage stats.
CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
260
To Next Page
Loading...
Need help?
General
