Maintenance
This item is displayed when you select (Setup) on the HOME screen.
• Nozzle Check•
Prints out the nozzle check pattern.
Checking for Nozzle Clogging
• Cleaning•
Select this to clean the print head.
Cleaning the Print Head
• Deep Cleaning•
Use this mode if no ink is ejected at all or if Cleaning does not solve the problem.
Deep Print Head Cleaning
• Print Head Alignment - Auto•
Adjusts the print head position automatically.
Automatic Adjustment to Straighten Lines and Colors
• Print Head Alignment - Manual•
Adjusts the print head position manually.
Manual Adjustment to Straighten Lines and Colors
• Print the Head Alignment Value•
Prints the print head position adjustment value.
• Paper feed adjustment•
Adjusts the paper feed amount.
◦ Set priority◦
Sets how the paper feed rate is adjusted.
▪ Auto▪
Selects Prioritize print quality or Prioritize length accuracy automatically according to the
printer driver settings.
▪ Prioritize print quality▪
Adjust to make the horizontal streaks of the printed documents less noticeable. The settings in
Adjust print quality are applied.
▪ Prioritize length accuracy▪
Adjusts the length of the ruled lines on the printed documents to match. The values of Change
adjustment values under Adjust feed length are applied.
261
To Next Page
Loading...
