Canon TX - Double Exposures

Double Exposures
Although the Canon TX is designed to prevent double
exposures being made by mistake, double exposures
can be made by the following steps:
1 When the first exposure has been made, depress the
film rewind button.
Rewind the film with the film rewind crank while
watching the red mark on the film rewind button
carefully.
Stop rewinding when the mark has made a 7/8 turn,
i.e., 315°.
4 Next, wind the film advance lever while lightly halding
the rewinding crank. When resistance is felt on the
film rewind crank, stop winding.
Wind the film advance lever once more. The camera
is ready for double exposures.
= By repeating the above process, any number of
exposures on the same frame can be made. However
the frame counter will continue to advance with each
exposure.
37