Canon TX - Film Rewinding

Film Rewinding
Be sure not to open the back cover before rewinding.
Otherwise, the entire roll will be exposed and ruined
as the exposed film is naked within the camera.
1 Press in the film rewind button.
Raise the film rewind crank, turn it in the direction
of the arrow, and rewind the film into the cartridge.
When the film rewind button stops revolving and
rewinding resistance becomes light, stop rewinding
immediately in order to keep the leader part of the
film outside the cartridge.
3 Open the back cover.
Pull up the rewind knob fully and remove the
Cartridge.
= Once the film rewind button has been pressed, the
finger may be removed. The button will pop out
automatically when the film advance lever is wound.
= If you force the film advance lever after the film
reaches its end, the film will become detached from the
cartridge spool or tear, and rewinding will become
impossible. In this case, open the back cover in a
darkroom, remove the film, and put it in a light-tight
box.
30