Canon TX - Film Loading

Film Loading
Canon TX accepts any standard 35mm film roll in
daylight loading cartriges. Always avoid loading film in
direct sunlight.
1 Raise the film rewind crank and pull it all the way
up. The cover will open slightly.
2 Open the cover fully. Face the film cartridge as
illustrated, and insert it into the cartridge Compart-
ment. Push the film rewind crank back into its former
position. The crank fork will slip into the axis of the
film cartridge. In case the crank does not fully return,
turn it slightly to the left or right.
at |