Canon TX - Page 29

noOoooonoaonDaooogg
Checking Correct Film Loading
The film is properly loaded and advanced if the film
rewind crank rotates counterclockwise when you wind
the film advance lever. If the film rewind crank does not
rotate, take out the film, as explained on the following
page, and reload.
Setting the Film Speed
When loading the film, be sure to set the film speed scale
at the proper position. Refer to page18.
Repacking a Long Film
When loading bulk film into an ordinary cartridge, be
sure to trim the tip of the leader between perforations.
ae