Canon VIXIA HF R10 User Manual

Video  59
Pre-recording Function
The camcorder will start recording 3 seconds before you press
, ensuring you do not miss important shooting opportuni-
ties. This is especially useful when it is difficult to predict when to start
recording.
1 Open ( ) the joystick guide.
2 Select ( ) [ Pre REC] and press .
• appears.
•Press again to turn pre-recording off.
3Press .
The scene recorded in the memory will start 3 seconds before
was pressed.
NOTES
• While pre-recording is activated, the camcorder will not emit any notifi-
cation sounds.
• The camcorder will not record the full 3 seconds prior to pressing
if the button was pressed within 3 seconds of having
turned on pre-recording or having finished the previous recording.
• Any of the following actions will deactivate the pre-recording function.
- Leaving the camcorder without any operation for 5 minutes.
-Pressing , , or .
- Setting the camcorder to standby mode.
Self Timer
appears.
Operating modes:
START/STOP
Pre REC
START/STOP
START/STOP
START/STOP
FUNC.
VIDEO SNAP
Operating modes:
[ Menu] [Self Timer] [On ]
FUNC.
FUNC.
COPY
Downloaded From VideoCamera-Manual.com Manuals

Canon VIXIA HF R10 Specifications

General

Sensor Type	CMOS
Image Processor	DIGIC DV III
Optical Zoom	20x
Digital Zoom	400x
LCD Screen	2.7-inch Touch Panel LCD
Video Resolution	1920 x 1080
Recording Format	AVCHD
Weight	260g (including battery and memory card)
Image Stabilization	Dynamic Mode
Internal Memory	8GB
Lens	Canon HD Video Lens
Maximum Aperture	f/1.8 - f/3.6
HDMI Output	Yes
Dimensions (W x H x D)	60 x 64 x 121 mm
Storage	SD/SDHC card
Memory Card Slot	SD/SDHC
Recording Media	SD/SDHC Card
Frame Rate	60i, 30p
Microphone	Built-in