Canon VIXIA HF R10 User Manual

Video  67
• Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.
On-Screen Displays and Data Code
You can turn most on-screen displays on or off.
Repeatedly press to turn the on-screen displays on/off in the
following sequence:
mode:
• All displays on
•Most displays off*
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
•Regular displays only (removes the histogram and information icons)
• All displays off
*Pressing will turn off most of the icons and displays that appears automati-
cally but will not remove onscreen displays that were turned on manually (for
example, onscreen markers, the audio level meter or the joystick guide).
Operating modes:
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code
(date/time of recording, information about the camera setup, etc.). In
mode, this information is displayed on the bottom bar and as
information icons; in mode, you can select the information to be
displayed with the [Data Code] setting.
DISP.
DISP.
COPY
Downloaded From VideoCamera-Manual.com Manuals

Canon VIXIA HF R10 Specifications

General

Sensor Type	CMOS
Image Processor	DIGIC DV III
Optical Zoom	20x
Digital Zoom	400x
LCD Screen	2.7-inch Touch Panel LCD
Video Resolution	1920 x 1080
Recording Format	AVCHD
Weight	260g (including battery and memory card)
Image Stabilization	Dynamic Mode
Internal Memory	8GB
Lens	Canon HD Video Lens
Maximum Aperture	f/1.8 - f/3.6
HDMI Output	Yes
Dimensions (W x H x D)	60 x 64 x 121 mm
Storage	SD/SDHC card
Memory Card Slot	SD/SDHC
Recording Media	SD/SDHC Card
Frame Rate	60i, 30p
Microphone	Built-in